news

Mining loader installation management
  • sjhl

The quality of mechanical equipment installation work is the basic guarantee for ensuring the processing efficiency and processing quality after the machinery is put into use, and can also reduce the occurrence of safety accidents as much as possible.For this reason, the standardized installation work before use of mining loaders should also be strictly managed to give full play to the role of mechanical equipment.  Construction personnel should also determine the installation process and standards for mining loaders based on relevant mechanical equipment installation work specifications, so as to ensure that installers and subsequent users can accurately install and use mining loaders in accordance with standards.  Mining loaders are not completely scattered after leaving the factory, so construction workers must be careful not to disassemble and reassemble the machinery and equipment without authorization.At the same time, construction workers also need to pay attention to checking the parameters of the mining loader and supporting parts during assembly work to ensure that they can be assembled together smoothly.Only then can the mining loader installation work be carried out according to the standardized assembly process.  The qualification instructions, certificates of conformity and other documents of construction machinery and equipment should be strictly checked, and the auxiliary components required for the installation of mining loaders should be carefully inspected to ensure that the installation work can be carried out smoothly.Of course, construction personnel should also verify and inspect the parameters of parts and components, and clean the surfaces of parts to ensure that they are matched with mechanical equipment.  Test run after the installation of the mining loader is essential. The debugging personnel must fully understand the system composition and working principle of the mining loader before debugging. They can determine whether there are problems with the mining loader from the aspects of sound, temperature and other indicators. Professional Only technicians can determine the operating status of mechanical equipment.

Repair methods for water tank failure in loaders
  • sjhl

The loader is an earthwork construction machine widely used in construction projects such as roads, railways, buildings, hydropower, ports, and mines. It is mainly used to shovel bulk materials such as soil, sand, gravel, lime, coal, etc. The water tank is the loader It is an important part of the system, but if it fails, how do we repair it?  First, when checking the water level of the water tank of the small loader accessories, the loader engine should be turned off, and the engine and water tank should be allowed to cool before performing the corresponding inspection process and checking the water level of the auxiliary water tank.Under normal circumstances, do not open the water tank cover of small loader accessories.  If there is no sub-water tank, be sure to remove the water tank cover.and follow the operating instructions.  Then check whether the water level in the water tank in the small loader accessories has dropped. Only after the water level drops can you check the water level in the water tank. Put your hand close to the engine and water tank to check the temperature of the surrounding air, but do not touch the engine and water tank directly with your hands.  The above is how the editor teaches you how to repair the water tank failure in the loader. Then we first loosen the water tank cover to release the water pressure, and then slowly remove the water tank cover.

How to distinguish between mining loaders and explosion-proof mining loaders
  • sjhl

Mining loaders and explosion-proof mining loaders are two different types of mechanical equipment that play different roles in the mines and mining industry.Although they have a similar appearance and functionality, there are some distinct differences between them.This article will introduce the differences between mining loaders and explosion-proof mining loaders to help you better understand these two types of mechanical equipment.  Mining loader  A mining loader is a type of mechanical equipment used in mines and mining industries to load and transport ore, rocks and other materials.It is usually controlled by the driver and can operate in extreme working environments, such as dusty, high temperature and high altitude environments.Mining loaders have powerful loading and unloading capabilities and can complete a large number of loading tasks in a short time.They are usually large pieces of machinery that require specialized operators to control.  Explosion-proof mining loader  Explosion-proof mining loader is a kind of mechanical equipment specially used in hazardous environments, such as coal mines, oil and natural gas mining and other industries.Since the working environment in these industries may contain dangers such as explosions and fires, explosion-proof mining loaders need to be explosion-proof and fire-proof.They are usually manufactured using special materials and techniques to ensure that they do not cause fires or explosions during work.Explosion-proof mining loaders are generally smaller than ordinary mining loaders and require fewer drivers to control them.  Distinguishing method:  The biggest difference between mining loaders and explosion-proof mining loaders lies in their uses and working environment.Mining loaders are typically used in mines and mining industries, while explosion-proof mining loaders are used in more hazardous environments such as coal mines, oil and gas mining, and other industries.  In addition, explosion-proof mining loaders are usually smaller and lighter than ordinary mining loaders, and use different materials and technology.Explosion-proof mining loaders need to be explosion-proof and fire-proof, so they require special materials and technologies to manufacture.Ordinary mining loaders do not have these requirements.  When purchasing a mining loader, you need to choose the right machinery and equipment based on your needs and working environment.If you need to work in a hazardous environment, then an explosion-proof mining loader will be a better choice.If you just need to do general loading and transporting work in mines and mining industries, then a regular mining loader will suffice.  In short, mining loaders and explosion-proof mining loaders are two different types of mechanical equipment. You need to choose the appropriate mechanical equipment according to your own needs and working environment.Hopefully this article will help you better understand the differences between these two mechanical devices.

Key points for storing underground loaders that are idle for a long time
  • sjhl

The underground loader is the main equipment commonly used in trackless mining operations in underground mines. It is more flexible in turning and easier to operate. If you want to leave it idle for a long time, in order not to damage the underground loader, you must pay attention to the following storage points:  1. Put it underground Clean and dry each part of the loader, and then place the equipment in a dry room. Do not store it in the open air. If it must be stored in the open air, park it on a cement floor with good drainage system, and cover the roof with a canvas.  2. Before storage, all the original oil in the underground loader must be replaced, and the underground loader must be filled with fuel and lubricating oil.  3. Apply a thin layer of grease to the metal surface of the piston rod.  4. Disconnect the negative wiring of the battery of the underground loader, replace the battery or remove it from the machine and store it separately.  5. If the temperature is below 0 degrees Celsius in winter, antifreeze should be added to the coolant.  6. Lock all parts and implement parking brake.  Therefore, it does not mean that the underground loader is no longer suitable, just leave it alone. Maintenance and maintenance work must be indispensable. Only in this way can it be used again without damage and ensure normal operation.